Broad use base and number of users both in industry and academia

Friendly, prompt and professional support

Continuously developed in cooperation with leading institutes

0

Home › Forums › Asimptote knowledge forum › simulating HVAC systems .

Viewing 3 reply threads
  • Author
    Posts
    • May 30, 2023 at 9:10 am #4016
      harish.p-3069
      Participant

      We are modeling and simulating an HVAC system. we have made a VCR cycle by giving the required load and temperature, we have also calculated the COP of the cycle. for our project, we need to model the VCR with a geothermal heat pump or by giving the VCR, ground condition, and compare the COP of the cycle after the. We need help to proceed further with the project.

    • June 1, 2023 at 10:18 am #4045
      Teus van der Stelt
      Keymaster

      Dear Harish,

      You can only upload images. I recommend that you take a screenshot of the system and the input summary you want help with.

      Best regards,
      Teus

    • June 1, 2023 at 11:22 am #4048
      harish.p-3069
      Participant

      Dear Teus,

      This is a normal VCR with inputs. In this cycle, we want to combine the geothermal loop in the summer cooling mode for this cycle where the ground condition will be given. We are doing this to increase the COP. To further understand our concept please go through this video ” https://www.youtube.com/watch?v=PI45yUhUWgk “.

      Best regards,
      Harish

      Attachments:
      You must be logged in to view attached files.
    • June 4, 2023 at 6:14 am #4077
      sreekanth.manavalla
      Participant

      Dear Harish, it is not clear to me how exactly you are going to incorporate a geothermal source in this VCR system. You can try to draw a simple labelled schematic diagram of what you intend to do and upload here.
      It would be better if you can provide a clear problem statement.

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.